Nitrile ylide dimerization: investigation of the carbene reactivity of nitrile ylides

A series of novel hexaaryl diazatrienes 5 ("nitrile ylide dimers") were synthesized directly from the corresponding diaryl ketimines 12 and dichlorotoluenes 13 in a facile one-pot synthesis. The carbene character of the nitrile ylides was investigated by varying the substituents on the aromatic ring adjacent to the carbene center. The isolation of the corresponding carbene dimers as stable crystalline materials with absorption maxima (lambda(max)) from 363 to 422 nm was shown to be promoted by the absence of strongly electron-withdrawing substituents. The crystal structures indicate that the E-isomers were isolated when phenyl, 3-methylphenyl, and 3-chlorophenyl substituents are present at the carbene carbon; the Z-isomer was isolated when the more sterically hindered 2,4,6-trimethylphenyl substituent (Mes) is present. The (1)H NMR spectra of the E-isomers demonstrate the nonequivalence of the aromatic rings, in which two of the aromatic rings of the imine moiety are pseudoaxial and the remaining aromatic rings are pseudoequatorial. The reactions proceed via the intermediate nitrile ylides 1 generated by the base-promoted 1,1-elimination of HCl from the intermediate chloroimine 14. The nitrile ylide was also generated by 1,3-elimination of HCl from the imidoyl chloride 18, confirming common pathways via the nitrile ylide as the dimer products obtained from these different routes were identical. The strongly electron-withdrawing 4-nitrophenyl substituent promotes the linear carbanion character of the 1,3-dipole and no dimer is formed.     

Thermal Gradients for the Control of Elution in RP-LC: Application to the Separation of Model Drugs

The use of temperature as a variable in liquid chromatography enables the facile alteration of eluotropic strength without the need to change solvent composition. The ability to change eluotropic strength via temperature alone means that thermal gradients can be used to mimic the effects of solvent gradients but without many of the unwanted effects of changes in solvent composition. Here we illustrate the use of thermal gradients as a means of controlling chromatographic separations using either constant flow or, with the flow rate increased to maintain isobaric conditions, constant pressure, performed using columns packed with 1.7 μm particles. A model is described that can be used to used to predict flow, pressure and temperature under gradient conditions. Practical experimental factors such as the need for post column cooling and the use of frit restrictors in order to obtain optimum results are described.     

Reactions of metal carbonyl cluster complexes with multidentate phosphine ligands; reactions with bis(diphenylphosphino)methane

Reactions of Rh₆(CO)₁₆ with bis(diphenylphosphino)methane (dppm) gave Rh₆(CO)₁₄(dppm), Rh₆(CO)₁₂(dppm)₂, or Rh₆(CO)₁₀(dppm)₃, depending upon the reaction conditions. Rh₄(CO)₁₀(dppm) may be obtained from the reaction of Rh₄(CO)₁₂ with dppm, but this derivative rapidly decomposes in solution to give Rh₄(CO)₈(dppm)₂, Rh₆(CO)₁₄(dppm), and Rh₆(CO)₁₂(dppm)₂. Ir₄(CO)₁₀(dppm) and Ir₄(CO)₈(dppm)₂ have also been prepared, and their structures are discussed on the basis of infrared and ³¹P NMR spectroscopic data.     

Bifunctional pincer-type organometallics as substrates for organic transformations and as novel building blocks for polymetallic materials

The reactivity of the bifunctionalized ligand NC(Br)N-I 1 [IC(6)H(2)(CH(2)NMe(2))(2)-3,5-Br-4] has been studied as a versatile synthon for organic and/or organometallic synthesis. Chemoselective metalation (M = Pd, Pt, Li) at the C(aryl)-I or C(aryl)-Br bonds was achieved by choosing the appropriate metal precursors. In this way a series of Pt(II) and Pd(II) complexes were prepared that have a second functional group available for further reactions. These Pt(II) and Pd(II) complexes were subjected to a wide range of organic and organometallic reactions, revealing the remarkable stability of their M-C sigma-bond and opening an easy route for the synthesis of mono- and (hetero)bimetallic building blocks. The scope of the chemistry of such building blocks shows that they are good candidates for use in the synthesis of dendrimers, bioorganometallic systems, or polymetallic materials. The X-ray crystal structures of the most representative complexes (2, 3a, 19, 20, and 24) are also reported.     

Chiral bidentate aminophosphine ligands: synthesis, coordination chemistry and asymmetric catalysis

Chiral aminophosphines Ph2PN(R)(CH2)nN(R)PPh2 1-4 [n= 2, R = CH(CH3)(Ph) 1; n= 3, R = CH(CH2CH3)(Ph) 2, n= 2, R = CH(CH3)(1-naphthyl) 3; n= 2, R = CH(CH3)(C6H11) 4] were synthesized by the reaction of ClPPh2 with the appropriate easily accessible enantiopure amine building blocks. For compounds 1 and 2, the corresponding selenides 5 and 6 were prepared to determine the electronic character of the phosphine moieties. By reaction of 1 with either PdCl2(cod) or PdCl(CH3)(cod) the cis-complexes 7 and 8 were obtained. The molecular structure for complex 7, cis-[PdCl2(1)], was determined by X-ray crystallography. Reaction of PtCl2(cod) with 1 or 2 yielded the corresponding monomeric cis-isomers 9 and 10. The rhodium derivative [RhCl(CO)(1)] (11) was obtained as a mixture of cis and trans-isomers. Preliminary results in the rhodium catalyzed hydroformylation of styrene and vinyl acetate, with ee's up to 51% and high regioselectivities, showed the potential of these chiral aminophosphines for homogeneous catalysis.     

Procedures for the enhancement of selectivity in liquid phase chemiluminescence detection

An overview of liquid phase chemiluminescence (CL) processes is presented and the potential for CL detection in liquid chromatography (LC) is discussed, with particular reference to the luminol and peroxyoxalate reactions. Post column ion displacement from a solid phase reagent [a cation exchange resin in the copper(II) form] followed by catalysis of the luminol reaction is used for the quantification of mixtures of weak acids after separation by ion-exclusion chromatography. Polyaromatic hydrocarbons (PAHs) released during the combustion of biomass fuels are separated by reversed-phase chromatography and quantified by their sensitizing effect on the peroxyoxalate reaction. This procedure is also used for the determination of carboxylic acids in non-aqueous media after selective pre-column derivatization with a fluorescent label (9-anthracenemethanol).     

New serratane triterpenes from western white pine bark

Three new serratanes were isolated from the nonsaponifiable fraction of western white pine ($\text{Pinus monticola}$ Dougl.) bark. The compounds were shown to be 3β-methoxyserrat-14-ene-21α,30-diol ($\text{8a}$), 3β-methoxyserrat-14-ene-21α, 29-diol ($\text{9a}$), and 3β-methoxyserrat-14-ene-21β,30-diol ($\text{10a}$), by a combination of chemical, and spectral methods.     

Conformational control in the cyclization of hydrogen-bonded supramolecular polymers

Bifunctional 2-ureido-4[1H]-pyrimidinone (UPy) derivatives can form small cyclic oligomers as well as long supramolecular polymers in chloroform solutions using the quadruple hydrogen-bonding motif. Ring-chain equilibria of a set of supramolecular monomers containing methyl-substituted alkyl linkers between the hydrogen-bonding UPy moieties were investigated by (1)H NMR spectroscopy and viscometry. The data were characterized in terms of critical concentration (CC, denoting the onset of polymerization) and equilibrium cyclic dimer concentration (EDC, representing preorganization of the monomer toward selective formation of cyclic dimer). Methyl substituents in the monomer were found to promote conformations favorable for cyclic dimerization, leading to an increase in both the EDC and the CC with respect to unsubstituted monomer. Furthermore, we observed an odd-even effect in the CC and EDC with increasing length of the linker between the hydrogen-bonding units. The combined results allow tuning of the critical concentration over a broad range and offer detailed information on the correlation between monomer structure, conformation, and polymerizability which may provide new insights for the study and design of other ring-chain equilibria or helix-random coil transitions.     

Methylene-azaphosphirane as a reactive intermediate

Reaction of the transient phosphinidene complexes R-P=W(CO)5 with N-substituted-diphenylketenimines leads unexpectedly to the novel 2-aminophosphindoles, as confirmed by an X-ray crystal structure determined for one of the derivatives. Experimental evidence for a methylene-azaphosphirane intermediate was found by using the iron-complexed phosphinidene iPr2N-P=Fe(CO)4, which affords the 2-aminophosphindole together with the novel methylene-2,3-dihydro-1H-benzo[1,3]azaphosphole. Analysis of the reaction pathways with DFT indicates that the initially formed methylene-azaphosphirane yields both phosphorus heterocycles by way of a [1,5]- or [1,3]-sigmatropic shift, respectively, followed by a H-shift. Strain underlies both rearrangements, which causes these remarkably selective conversions that can be tuned by changing the substituents.     

Novel binding of beryllium to dicarboxyimidazole-based model compounds and polymers

The ligand 4,5-dicarboxyimidazole (H(2)DCI) and its methyl derivative 1-methyl-4,5-dicarboxyimidazole (H(2)MDCI) have been shown to bind to Be(II) forming a zwitterionic species that has been structurally characterized. A new dicarboxyimidazole-based polymer has been prepared and its Be-binding properties have been studied using NMR ((1)H and (9)Be) and fluorescence spectroscopy; it represents a rare example of beryllium binding to a polymer. Models of the mononuclear and polymeric Be(II)-binding sites have been studied using density functional theory (DFT), and the (9)Be NMR chemical shifts of these model materials have been calculated for the purpose of direct comparison to experimentally observed values. Differences in the binding modes of the mononuclear and polymeric species are discussed.